Willow beam

There are spaces where a compact wall light disappears — and the Willow Beam is the answer for those spaces. At 200mm tall, it's the most vertically prominent fitting in the Lumifi range. The rounded body at 105mm wide and 105mm deep gives it a sculptural, three-dimensional quality that holds its ground on large wall surfaces, wide entry facades, and double-storey outdoor walls where smaller fittings would read as decorative rather than deliberate. The 2×5W Epistar LEDs deliver enough output to match the scale of the fitting — a warm, dual-direction wash that extends well above and below the body and reinforces the sense of presence the form already establishes. At 2700K, the output is warm and residential. The sand black finish and double powder coat suit contemporary and heritage exteriors alike, particularly where contrast between the fitting and the wall surface is part of the design intent. Epistar LEDs for colour consistency, Kegu driver for long-term reliability, IP54 rated, SAA compliant, and backed by a 2-year Australian warranty. Running costs are under $9 a year based on typical evening use.

• Large entry facades and front walls where a proportionally substantial fitting is needed
• Double-storey and taller outdoor walls where compact fittings feel undersized
• Wide alfresco walls and covered outdoor entertaining areas
• Gate pillars and freestanding wall sections viewed from multiple angles
• Bathroom feature walls
• Contemporary and heritage exteriors where a sand black rounded form suits the palette

The Willow Beam runs on 240V AC and requires a licensed electrician to install. At 105mm deep it ties with the Hourglass as the deepest fitting in the range — physical clearance near doors, gates, and high-traffic pathways is worth confirming before marking up the install position. At 200mm tall, placement height on the wall also has a bigger visual impact than with smaller fittings. Ask your sparky to run a silicone bead along the back edge where the fitting meets the wall as standard practice, particularly given the depth and outdoor exposure.

SKU: PL-278B

Wattage: 2 × 5W (10W total)

Colour Temp: 2700K Warm White

IP Rating: IP54

Voltage: 240V AC

LED Chip: Epistar

Driver: Kegu

Body Finish: Double powder-coated, sand black

Light Direction: Up and Down

Profile: Rounded / cylindrical

Dimensions: 105mm (W) × 200mm (H) × 105mm (D)

Compliance: SAA Approved

Warranty: 2 Years (Australian)