Scala

The Scala is a compact square wall light built for outdoor use — porches, alfresco areas, bathroom feature walls, and covered walkways. Its clean profile suits modern rendered homes and traditional brick exteriors without trying too hard to do either.

Inside, a Kegu LED driver (one of China's most respected driver manufacturers) is paired with an EDISON LED chip, chosen for colour consistency across production batches. That matters when you're buying more than one: you won't get a subtle mismatch between lights installed six months apart.

The double powder-coated body carries an IP54 rating, handling splashing water and dust without issue. It runs on 240V AC, needs a licensed electrician to install, and is then left completely alone. The 2-year Australian warranty is backed by a real business with a showroom you can walk into.

• Indoor staircases needing subtle guidance lighting
• Hallways and transitional walkways
• Low-light environments where glare is an issue
• Modern residential interiors
• Layered architectural lighting setups

A standard job for any licensed electrician. No exotic cabling, no control systems, no proprietary hardware. Runs on 240V AC and mounts to a standard wall plate. Most installs take under 30 minutes per light.

1. Run Your Cable

Standard 240V AC wiring to the mounting position. Your electrician handles this as part of a normal wall light install — nothing unusual required.

2. Mount & Connect

The Scala attaches to a standard wall plate. Connect the leads — no separate driver box needed. Everything is self-contained inside the fixture.

3. Seal the Edge

Ask your electrician to run a clear silicone bead along the wall-to-light join. A small step that adds extra weather protection and peace of mind for years to come.

SKU: PL-268B

Wattage: 3W

Colour Temperature: 2700K Warm White

IP Rating: IP54

Voltage: 240V AC

LED Chip: Edison

Driver: Kegu

Body Finish: Double powder-coated, sand black

Direction: Up or Down (set at installation)

Dimensions: 150mm (W) × 150mm (H) × 35mm (D)

Compliance: SAA Approved

Warranty: 2 Years (Australian)