Pebble glow

Some spaces don't need a large wall light — they need a small one done properly. The Pebble Glow is exactly that. At 50mm wide and 62mm tall, it has the smallest footprint in the Lumifi wall light range, and the rounded organic form gives it a character that punches above its size. The 80mm depth means it projects off the wall with a pebble-like three-dimensionality that makes it visually interesting despite the minimal face dimensions. The up/down throw from two 2W Cree LEDs creates a warm accent above and below the fitting — at 2700K it's soft, close, and residential. At 4W total draw, running costs are negligible. This is a fitting for narrow wall sections beside door frames and gate pillars, for spaces where multiple small fittings used in a row create a deliberate repeating rhythm, or simply for anywhere a larger fitting would look out of proportion. Cree LEDs for colour consistency, Kegu driver for reliability, double powder-coated in sand white, IP54 rated, SAA compliant, 2-year Australian warranty. Under $4 a year to run based on typical evening use.

• Narrow wall sections beside door frames, gate pillars, and slim architectural reveals
• Spaces where multiple small fittings used in series create a deliberate pattern
• Front entry and porch accent lighting where a minimal footprint is preferred
• Alfresco and covered outdoor entertaining areas
• Bathroom feature walls
• Light-toned exteriors where sand white and a small organic form suit the palette

The Pebble Glow runs on 240V AC and requires a licensed electrician to install. At just 50mm wide, the contact area between the fitting and the wall is very small — the silicone bead along the back edge is particularly important here. Ask your sparky to run it as standard practice. Keeps moisture out and ensures long-term performance, especially in outdoor and alfresco locations where the fitting is small enough to be easily overlooked at inspection.

SKU: PL-404W

Wattage: 2 × 2W (4W total)

Colour Temp: 2700K Warm White

IP Rating: IP54

Voltage: 240V AC

LED Chip: Cree

Driver: Kegu

Body Finish: Double powder-coated, sand white

Light Direction: Up and Down

Profile: Rounded / organic

Dimensions: 50mm (W) × 62mm (H) × 80mm (D)

Compliance: SAA Approved

Warranty: 2 Years (Australian)