Aristo Line

The best wall lights don't draw attention to themselves — they draw attention to the space. The Aristo Line is designed with that in mind. At 170mm wide and just 40mm deep, it sits closer to the wall than virtually any other fitting in this category, making it the right choice for spaces where projection matters: narrow rendered columns, pillar faces, or any wall where a heavier-profile fitting would look awkward. Six Cree LEDs spread the light evenly across the up/down throw, and a Kegu driver keeps the whole system stable over time — which is where most fittings at this price point eventually fall short. At 2700K and 6W total draw, the output is warm, residential, and economical. Running costs sit under $5 a year based on typical evening use. Rated IP54 and double powder-coated in sand white for the Australian climate — ready for outdoor walls, alfresco areas, and bathroom installations.

• Narrow columns, rendered pillar faces, and tight wall sections
• Front entry and porch lighting where projection is a concern
• Alfresco and covered outdoor entertaining areas
• Bathroom feature walls
• Light-toned exteriors where a sand white finish suits the palette
• New build installs where a slim, architectural profile is specified

The Aristo Line runs on 240V AC and requires a licensed electrician to install. The shallow 40mm depth means the contact edge between the fitting and the wall is relatively narrow — ask your sparky to run a clear silicone bead along that back edge as standard practice. It keeps moisture out and ensures the fitting performs exactly as it should long-term. Worth flagging to your electrician before install so it doesn't get missed.

SKU: PL-232W

Wattage: 6 × 1W (6W total)

Colour Temp: 2700K Warm White

IP Rating: IP54

Voltage: 240V AC

LED Chip: Cree

Driver: Kegu

Body Finish: Double powder-coated, sand white

Light Direction: Up and Down

Dimensions: 170(W) × 80(H) × 40(D) mm

Compliance: SAA Approved

Warranty: 2 Years (Australian)